منتدى طلبة كلية الهندسه بأسوان
هل تريد التفاعل مع هذه المساهمة؟ كل ما عليك هو إنشاء حساب جديد ببضع خطوات أو تسجيل الدخول للمتابعة.

منتدى طلبة كلية الهندسه بأسوان

منتدى طلبة كلية الهندسه بأسوان
 
الرئيسيةالتسجيلأحدث الصوردخول
منتدى طلبة كلية الهندسه بأسوان :: الهندسة المدنية :: الـهـندســة الإنـشــائـيــة
 

 New Methods in building and structure frames

اذهب الى الأسفل 
كاتب الموضوعرسالة
eng_ghost
مراقب عام المنتديات والحوار العام ومنتدى الهندسة المدنية
مراقب عام المنتديات والحوار العام ومنتدى الهندسة المدنية
eng_ghost


عدد المساهمات : 4632
تاريخ التسجيل : 16/04/2008
العمر : 38
الموقع : just in my dreams ,, i can reach any place
رقم العضوية : 1036
Upload Photos : New Methods in building and structure frames Upload

New Methods in building and structure frames Empty
مُساهمةموضوع: New Methods in building and structure frames   New Methods in building and structure frames I_icon_minitimeالإثنين 22 مارس - 15:55

EUREKA EUREKA!!



اقتباس :
‎New Methods in building
and structure frames reduce structural failures and slow down building
collapses and other structural failures in seismic, wind, and collision
forces, and can be a major benefit in all post-disaster recovery and
rebuilding projects.







DUAL/MULTIPLE RIGID
STRUCTURAL FRAME TRIBUTARY AND LOAD-PATHED TECHNOLOGIES ARE DISCOVERED!!


  • STRUCTURAL
    STRAP-NETS AND EXTENSIONS     ADDS A COMPLETE,
    TOTAL-FRAME, INDEPENDENT-PERFORMING, CONTINUOUS FORCE-LOADS ABSORBING
    AND FRAME POST-TENSIONING REINFORCING ELEMENT TO ANY/ALL TYPES OF
    STRUCTURAL FRAME ASSEMBLAGES!!
  • REQUIRING A COMBINATION OF THREE SEPARATE ASSEMBLY AND
    INSTALLATION INNOVATIONS, STRUCTURAL STRAP-NETS AND EXTENSIONS ADDS TWO-FOUR
    (+) TIMES THE AMOUNTS OF ALLOWABLE LOADS TO STRUCTURAL FRAME ASSEMBLAGES
    INSTALLED WITH!!
  • DUAL-TRIBUTARY
    STRUCTURAL-ASSEMBLAGE CONNECTION ASSEMBLIES LED TO INSTALLED-FLEXIBLE
    SOLID STEEL RIGID STRAPPING CORDS, THAT LED TO EXTERNAL-FRAME,
    INTERIOR-BODY INSTALLABLE FULL-STRUCTURE CONTINUOUS STRUCTURAL
    REINFORCING!!
  • STRUCTURAL STRAP-NETS
    FOCUS ON ADDRESSING THE STRUCTURAL FRAME/BODY ASSEMBLAGE HORIZONTAL AND
    VERTICAL LINEAR SEAMS, JOINTS, A/O INTERSECTIONS, LEAVING NO STRUCTURAL
    ASSEMBLAGE ELEMENT UNREINFORCED!!


  • STRUCTURAL
    STRAP-NET EXTENSIONS     PROVIDE A SECONDARY ANCHORING OR
    FASTENING STRUCTURAL ELEMENT THAT SECURES STRUCTURE FRAMES TO
    FOUNDATIONS, AND ATTACHED STRUCTURES AND EQUIPMENT TO THE STRUCTURE
    FRAMES!!

6-SIDED STRUCTURAL BODY-FRAME ANALYSIS:

New Methods in building and structure frames TDS_FINAL_DRAFTS007.2824459_std

  • IN A 6-SIDED STRUCTURAL BODY-FRAME, THERE ARE SIX STRUCTURAL
    COMPONENTS (THE PANELS/SIDES), 12 LINEAR INTERSECTION STRUCTURAL
    ELEMENTS, AND EIGHT 3-POINT INTERSECTION STRUCTURAL ELEMENTS, FOR A
    TOTAL OF SIX COMPONENTS AND 20 ELEMENTS.
  • WITHOUT
    A CONTINUOUS STRUCTURAL COMPONENT ADDRSSING EACH AND EVERY STRUCTURAL
    BODY-FRAME INTERSECTION, ONLY SOME OF THE FORCE-REACTIONS ARE
    ADDRESSIBLE.
  • THE STRUCTURAL
    BODY-FRAME COMPONENTS PRIMARILY PERFORM IN COMPRESSION RESISTANCE, AND
    THE STRUCTURAL STRAP-NET PERFORMS PRIMARILY IN TENSION-RESISTANCE.
  • STRUCTURAL
    STRAP-NETS ADDRESS THE 20 STRUCTURAL ELEMENTS CONTINUOUSLY, WITH A
    CONTINUOUSLY ASSEMBLED AND CONNECTED STRUCTURAL COMPONENT.
  • ONCE
    INSTALLED AND ANCHORED TO THE STRUCTURAL BODY-FRAME, THE STRUCTURAL
    STRAP-NET AND THE STRUCTURAL BODY-FRAME COMBINE TO RESIST ALL APPLIED
    FORCES AND LOADS ON THE STRUCTURAL BODY-FRAME ASSEMBLAGE.


MINIMUM
STRUCTURAL STRAP-NET FOR 6-SIDED STRUCTURAL BODY-FRAME:
New Methods in building and structure frames TDS_FINAL_DRAFTS008.2824703_std



  • THE STRUCTURAL STRAP-NET INSTALLS TO THE
    STRUCTURAL BODY-FRAME.
  • THE
    STRUCTURAL STRAP-NET CORNER CONNECTION ASSEMBLIES ADDS LATERAL AND
    ROTATIONAL FORCE IMPACT RESISTANCE AT EACH STRUCTURAL BODY-FRAME 3-POINT
    CORNER ASSEMBLAGE.
  • THE
    STRUCTURAL STRAP-NET RING AND LINKING CORDS ADD TWO DISTINCT STRUCTURAL
    BODY-FRAME STRESS REDUCING PERFORMANCES; ADDITIONAL LOADS-DISPERSING
    TRIBUTARIES, AND DAMPING OF THE ABSORBED AND TRANSFERRING LOADS THROUGH
    THE RING AND LINK CORDS, WHICH DISSIPATE SOME OF THE LOADS BY RESONANCE
    VIBRATIONS.
  • THE STRUCTURAL STRAP-NET
    ALSO POST-TENSIONS IN PROPORTIONATE COUNTER-ACTION TO THE STRUCTURAL
    BODY-FRAME MOMENTUM AND MOVEMENTS, RELIEVING STRESS ON THE STRUCTURAL
    BODY-FRAME AND PREVENTING FULLSEPARATIONS OF THE STRUCTURAL BODY-FRAME
    COMPONENTS. THIS ALLOWS THE STRUCTURAL BODY-FRAME TO PERFORM IN
    COMPRESSION-RESISTANCE FOR LONGER DURATIONS AND IN MULTIPLE AND VARIABLE
    PERFORMANCES.
  • THE COMBINED STRUCTURAL
    STRAP-NETTED STRUCTURAL BODY-FRAME PERFORMS ALL COMPRESSION AND TENSION
    FORCE-RESISTANCE FUNCTIONS FOR ALL DIRECTIONS OF APPLIED FORCES AND
    LOADS, IN ALL STRUCTURAL COMPONENTS AND STRUCTURAL ELEMENTS OF THE
    STRUCTURAL ASSEMBLAGE, IN ADDITION TO REDUCING STRESSES ON THE
    STRUCTURAL BODY-FRAME COMPONENTS AND CONNECTIONS.

THE FIRST WORKING CONTINUOUSLY STRUCTURAL
STRAP-NETTED STRUCTURE FRAME PROTOTYPE:

  • THE
    FOLLOWING EXPERIMENTAL CONTINUOUSLY REINFORCED STRUCTURAL FRAME
    ASSEMBLAGE HAS BEEN TESTED IN COLLISION FORCE IMPACTS THAT ILLUSTRATE
    THE STRAP-NET AND STRUCTURE FRAME ARE COMPATIBLE UNDER HEAVY APPLIED
    FORCE-LOADS STRESSES. (TEST VIDEOS AND RECORDED SOUND RESONANCE
    GRAPHS/CHARTS ARE POSTED ON MY FACE BOOK PAGES.)
  • IN
    APPLIED FORCE-LOADS STRESSES, THE STRUCTURAL STRAP-NET STRUCTURALLY
    PERFORMS IN FOUR BASIC NEW CHRONOLOGICAL PHASES; STRUCTURE-FRAME APPLIED
    FORCE-LOAD MOMENT-RESISTING REINFORCING, FORCE-LOAD IMPACT SHOCK
    ABSORBTION, INDEPENDENT TRIBUTARY FORCE-LOADS TRANSFERRING DISSIPATIONS,
    AND STRUCTURE FRAME POST-TENSIONING REINFORCING.
  • ADDITIONALLY,
    THE STRUCTURAL STRAP-NET ADDS MORE INITIAL APPLIED FORCE-LOADS REDUCING
    DISTRIBUTION TRIBUTARIES, AND STRUCTURE FRAME STABILITY AND SEPARATION
    LIMITATIONS, WHICH MAINTAINS THE STRUCTURE FRAME MEMBERS TOGETHER LONGER
    UNDER HEAVY STRESSES AND LOADINGS, INCREASING THE STRUCTURAL
    FORCE-RESISTING PERFORMANCES OF THE STRUCTURE FRAME ASSEMBLAGES.
  • THE
    INSTALLED-FLEXIBLE STRAPPING CORDS ALLOWS THE STRUCTURAL STRAP-NETS TO
    FLEX INTO TENSION AND RETURN TO IN-FLEX POSITIONS IN AND AFTER APPLIED
    FORCE-LOADS ON THE STRUCTURE FRAME, WHICH ALLOWS THE STRAP-NETS TO
    PERFORM IN MULTIPLE APPLICATIONS, AS WELL AS IN VARIABLE LOCATIONS OF
    APPLIED FRAME STRESSES, LOADINGS, AND FRAME ASSEMBLAGE AND MEMBER
    MOVEMENTS (DISPLACEMENTS).
  • THE
    STRUCTURAL STRAP-NET FOLLOWS THE GENERAL SHAPES OF THE INSTALLED-WITH
    STRUCTURAL FRAME ASSEMBLAGES, WHICH ALLOWS FOR CONTINUOUS REINFORCING TO
    BE INSTALLED WITH ANY SHAPED AND MATERIALED STRUCTURAL FRAMES AND
    BODIES!!


New Methods in building and structure frames Photo-4006.111112012

  • IN THIS CONTINUOUSLY REINFORCED STRUCTURAL
    FRAME ASSEMBLAGE, THE FRAME IS ASSEMBLED WITH DOUGLAS FIR #2
    CONSTRUCTION GRADE WOOD, AND THE INSTALLED STRUCTURAL STRAP-NET IS
    ASSEMBLED WITH ASTM A36 GRADE STRUCTURAL STEEL.
  • THE COMPRESSIVE STRENGTH OF THE WOOD FRAME
    COMPONENTS ARE 1,000psi; THE TENSILE STRENGTH OF THE STEEL STRAP-NET
    COMPONENTS AND FASTENERS ARE 30,000psi, AND ULTIMATE STRENGTHS ARE
    52,000psi.
  • INSTALLED ASSEMBLAGE STRENGTH OF THE STRUCTURAL
    STRAP-NET IS APPROXIMATELY 3-1 (75%/25%) HIGHER THAN THE WOOD FRAME.
  • INSTALLED ASSEMBLAGE STRENGTHS OF STRUCTURAL
    STRAP-NETS IN STRONGER psi MATERIAL COMPONENT FRAMES NEVER EXCEEDS 1-1
    (50%/50%)
  • THE LOCATIONS AND PLACEMENTS OF THE
    CONTINUOUSLY ASSEMBLED STRAPPING CORDS AND (FASTENED TO THE WOOD
    FRAME) CONNECTORS COMPLIMENTS THE WOOD FRAME AND IS COMPATABLE WITH THE
    FRAME WHEN THE STRUCTURAL ASSEMBLAGE IS STRESSED BY APPLIED FORCES AND
    LOADS.
  • THE STRAPPING CORDS ARE INSTALLED IN FLEXURE,
    THE CONNECTION ASSEMBLIES AND WOOD FRAME ARE INSTALLED AND ASSEMBLED IN
    RIGIDITY.
  • THE STRAP-NET LINKING CORDS AND CONNECTOR CAPS
    ARE INSTALLED TO THE FRAME'S INTERIOR, AND THE UPPER (RETAINER) AND
    LOWER (ANCHOR) STRAP-NET RING-CORDS ARE INSTALLED TO THE FRAME'S
    EXTERIOR.
  • THE WOOD FRAME RESISTS APPLIED FORCES AND
    LOADS, AND THE STEEL STRAP-NET RESISTS INITIAL FRAME MOVEMENTS, RELIEVES
    FORCE-LOAD STRESSES ON THE WOOD FRAME, AND IN POST-TENSIONING, RESISTS
    MOVEMENTS OF THE WOOD FRAME ASEMBLAGE AND COMPONENTS AGAIN.
  • THE STRAP-NET FLEXES AND RESTS IN ACCORDANCE
    AND IN PROPORTIONAL BALANCE OF THE AMOUNTS OF MOVEMENTS OF THE WOOD
    FRAME ASSEMBLAGE.
  • IN RETAINING THE WOOD FRAME'S COMPONENTS FROM
    SEPARATIONS, THE WOOD FRAME ASSEMBLAGE AND COMPONENTS CAN RESIST APPLIED
    FORCES AND LOADS FOR LONGER DURATIONS.
  • THE STRUCTURAL STRAP-NETTED WOOD FRAME IS
    COMPLETELY LATERAL, SHEAR, UPLIFT, EXPANSION AND CONTRACTION, AND
    ROTATIONAL RESISTANCE REINFORCED.
  • INTERIOR, EXTERIOR, FRAME COVERINGS AND
    CROSS-FRAMING/PANELS DO NOT COMPROMISE THE REINFORCED DUAL-TRIBUTARY
    STRUCTURAL FRAME ASSEMBLAGE.



STRUCTURAL STRAP-NETS REDUCES THE VARIETY OF REINFORCING HARDWARE IT TAKES TO
REINFORCE STRUCTURAL FRAMES!!




  • THE CONTINUOUS INSTALLED-FLEXIBLE STRAPPING CORDS ALLOWS THE
    STRUCTURAL DESIGNER AND FRAME REINFORCING INSTALLER TO GRAB MORE OF THE
    FRAME AND STRUCTURE.
  • THE FEWER COMPONENTS OF REINFORCING HARDWARE
    AND MATERIALS EASES THE CONTRACTOR'S AND/OR DESIGNER'S PROJECT/BUILDING
    CONSTRUCTION ESTIMATING WORK.
  • THE CONTINUOUSLY INSTALLED STRUCTURAL STRAP-NET
    ADDS MORE MATERIAL/PRODUCT SALES, WHILE SIMPLIFYING THE PRODUCTION AND
    DISTRIBUTION PROCESSES FOR THE STRUCTURAL REINFORCING MANUFACTURERS AND
    DISTRIBUTION CENTERS.
  • THE REDUCED NUMBERS OF REINFORCING CONNECTORS,
    ISOLATED STRAP-TIES/HARDWARE, AND FASTENERS INCREASE CONSTRUCTION
    ASSEMBLING SAFETY, SPEED, AND FRAME DURABILITIES.
  • THE STRUCTURAL STRAP-NETTED STRUCTURAL FRAME
    ASSEMBLAGES ARE FULLY LATERAL, OVERTURNING, AND
    DISPLACEMENT/DISLODGEMENT REINFORCED BEFORE ANY FRAME COVERINGS ARE
    APPLIED, WHICH CAN LEAD TO BETTER THERMAL, MOISTURE, WATER, FIRE, ETC;
    ALTERNATIVE INTERIOR AND EXTERIOR FRAME COVERING MATERIALS,
    LIGHTER-WEIGHT FRAMES AND FRAME COVERINGS, AND NEW SHAPE AND STRUCTURE
    LOCATION DESIGN AND PLANNING HORIZONS!!


New Methods in building and structure frames TDS_FINAL_DRAFTS_001.11122614_std

  • ORIGINAL SKETCH DRAWINGS BY INNOVATOR RANDY
    LEE DUBE


"CLAW-CONNECTORS" AND "CLAW-CONNECTION ASSEMBLIES";
"ARE WHAT WE CALL OUR INNOVATIONS IN DUAL-TRIBUTARY FRAME ATTACHING AND
ANCHORING FASTENING ASSEMBLIES, THAT ADDS PERFORMANCE-BASED DESIGN WITH
STRENGTH-DESIGN, IN THE CONTINUOUSLY REINFORCED STRUCTURAL BODY-FRAME
DESIGN AND ASSEMBLY PRACTICE!!"
New Methods in building and structure frames SHED_SAMPLE009.111224917

  • COVER PAGE OF SAMPLE MANUFACTURED SHED DESIGN
    WITH A CONTINUOUS REINFORCING STRUCTURAL STRAP-NET.
  • NOTE
    THE "CLAW-CONNECTORS" DETAIL ILLUSTRATIONS AND THE CONTINUOUSLY
    ASSEMBLED TOP-RING ALONG THE DIMENSIONED SHED WALL-TOP PLATES.
  • WITHOUT
    THE "CLAW-CONNECTIONS", THE CONTINUOUSLY ASSEMBLED STEEL STRAPPING RING
    COULD NOT BE CONSIDERED FOR STRUCTURAL PERFORMANCE DESIGN CRITERIA, AND
    WITHOUT THE CONTINUOUSLY ASSEMBLED STEEL STRAPPING, NEITHER COULD THE
    "CLAW-CONNECTORS."


PHASE 1;
MOMENT-RESISTANCE REINFORCING (AT UPPER AND LOWER STRUCTURE FRAME
LOCATIONS):
New Methods in building and structure frames VERTICAL_CLAW-CONNECTION_ASSEMBLY010.111230514

  • WHEN INSTALLED, "CLAW-CONNECTION ASSEMBLY" AND
    "CLAW-CONNECTORS" FUNCTION AS STANDARD IMPACT FORCE-RESISTING
    REINFORCING CONNECTORS.
  • NOTE
    THE TOP AND BOTTOM CORNER PLACEMENTS OF THESE TWO "CLAW-CONNECTORS";
    THIS STRUCTURAL STRAP-NET 'PHASE-ONE' STRUCTURAL PERFORMANCE, WITH THE
    CONNECTED CONTINUOUS STEEL STRAPPING, CAN RESIST MULTIPLE DIRECTIONS AND
    ROTATIONS OF APPLIED FORCES AT THESE KEY LOCATIONS OF THE STRUCTURAL
    BODY-FRAMES AT THE SAME TIME AND IN DURATIONAL AND
    REPETITIVE CONDITIONS.
  • THE
    CONTINUOUSLY ASSEMBLED STRAPPING RING-CORDS AND LINK-CORDS ADD TWO MORE
    PHASES OF FORCE-RESISTANCE ALL THE WAY AROUND THE STRUCTURAL
    BODY-FRAME, FOR A COMPLETE, FULL FORCES-RESISTANT AND RESILIENT
    STRUCTURAL BODY-FRAME UNIT.

PHASES 2 & 3; FORCE-LOADS
REDUCTIONS ALONG UPPER AND LOWER STRUCTURE BEAMS AND WALL PANELS:
New Methods in building and structure frames VERTICAL_WALL_CLAW-CONNECTION_ASSEMBLY011.111234638

  • EXCERPT FROM PHYSICS STUDY ON VERTICAL WALL
    "CLAW-CONNECTION ASSEMBLIES."
  • NOTE
    THAT THE STRENGTH OF THE STEEL STRAPPING ALLOWS FOR THE VERTICAL (AND
    HORIZONTAL) LINKING STRAPPING CORDS TO BE INSTALLED AT VARIOUS LENGTHS.
  • THE MATERIAL PROPERTY STRENGTHS OF THE STEEL STRAPPING,
    CONNECTORS, AND FASTENERS IS KEY IN HOW THE STRUCTURAL STRAP-NET RETAINS
    THE ACCESSORIZED STRUCTURAL BODY-FRAME'S ASEMBLAGES, COMPONENTS, AND
    MATERIALS.

PHASE 4; POST-TENSIONING @ CONNECTION
CAPS:
New Methods in building and structure frames CLAW-CONNECTOR_PROPERTIES012.111235734

  • EXCERPT FROM MATERIALS PROPERTIES STUDIES
  • NOTE
    THAT THERE ARE THREE XYZ VECTOR AXIS'; RIGID IN BOTH DIRECTIONS OF
    EACH.
  • THE RIGID STEEL
    CONNECTOR CAP, AND "CLAW-CONNECTOR" ASSEMBLY MATCHES UP WITH EACH AND
    EVERY DIRECTION OF APPLIED FORCES AND IMPACTS IN THIS ASSEMBLY
    PLACEMENT, AND THE MATERIAL PROPERTY STRENGTHS OF THE STEEL STRAPPING,
    CONNECTOR, AND FASTENERS ARE PLENTY STRONG ENOUGH TO RESIST THE APPLIED
    FORCES AND IMPACTS.



KEY COMPONENT OF STRUCTURAL
STRAP-NETS:
New Methods in building and structure frames STEEL_STRAPPING_CORD_PROPERTIES013.11200649

  • EXCERPT FROM MATERIALS PROPERTIES STUDIES.
  • NOTE
    THAT THE STEEL STRAPPING CORD CONTAINS THE POST-INSTALLED STRUCTURAL
    PERFORMANCE PROPERTIES OF RIGIDITY, FLEXURE, AND ELASTICITY SEPARATELY
    ALONG EACH OF THE STRAPPING CORD'S XYZ VECTOR AXIS'.
  • THESE
    STRUCTURAL PERFORMANCE PROPERTIES ALONG WITH THE STEEL MATERIALS
    STRENGTH PROPERTIES IS WHAT ALLOWS, PHYSICALLY, THE SUCCESSFUL EXTERNAL
    LOCATIONS OF THE COMBINED MOMENT-RESISTING, SHOCK-ABSORBING, AND
    POST-TENSIONING STRUCTURAL STRAP-NETS.

EXTENSIONS; CROSS-FRAMING:
New Methods in building and structure frames DETAILSimg007.119130839

  • EXCERPT FROM CROSS-FRAMING STRUCTURAL STRAP-NET
    EXTENSIONS.
  • NOTE THE EXTERNAL
    STRAPPING CORD AND FASTENER INSTALLATION AND PLACEMENTS. THIS ASSEMBLING
    METHOD IS MUCH SAFER FOR THE REINFORCING INSTALLER, AS THERE ARE FEWER
    FASTENERS TO INSTALL, NO DRILLING INTO OR PLACEMENT OF REINFORCING STEEL
    WITHIN THE WALL CAVITIES, AND THE LOCATIONS OF THE FASTENERS REDUCE THE
    AMOUNTS OF TIMES THAT THE INSTALLER HAS TO CLIMB UP AND DOWN LADDERS,
    SCAFFOLDING, ETC; TO PLACE AND FASTEN THE STRUCTURE FRAME'S REINFORCING.
  • THIS
    REINFORCING ASSEMBLING METHOD ADDRESSES THE WALL'S PARALLEL AND
    PERPENDICULAR LATERAL FORCES RESISTANCES, WITH THE CORNER CONNECTIONS
    AND TOTAL PERIMETER RING-CORD, ADDRESSES THE HORIZONTAL
    TWISTING/OVERTURNING FORCES RESISTANCES, AND WITH THE CORNER DIAGONAL
    AND WALL VERTICAL LINKING STRAPPING CORDS AND CONNECTIONS INSTALLED, THE
    WALL'S AND THE ROOF'S UPLIFT AND SHEAR FORCES RESISTANCES ARE ADDRESSED
    AS WELL, AND INCLUSIVELY!!

EXTENSIONS;
FOUNDATIONS (HEAVY-DUTY):
New Methods in building and structure frames V-6_X-N-L%21%21.12152051_std

  • EXCERPT FROM ANCHORAGING VARIATIONS FOR
    STRUCTURAL STRAP-NETS AND EXTENSIONS
  • THIS
    FOUNDATION MODIFICATION REDUCES FORCE-LOADS FROM EARTHQUAKES AND
    TORNADOES
  • NOTE THAT THE STRUCTURE
    FRAME IS TIED TO THE FOUNDATION WITH MULTIPLE ANCHORAGING COMPONENTS
  • THE
    STRUCTURE FRAME RETAINING WALL IS DESIGNED TO RESIST INITIAL STRUCTURE
    BODY MOVEMENTS, NOT THE FULL WEIGHT LOADS OF THE STRUCTURE BODY.
  • BY
    TRANSFERRING FORCE-LOADS TO MORE TRIBUTARIES, AND WITH THE REDUCED
    FORCE-LOADS FROM THE STRUCTURE FRAME BODY ABOVE, THERE IS INITIAL
    STRUCTURE BODY MOVEMENT REDUCTIONS, AND LESS STRESS ON THE RETAINING
    WALL.



BASIC
PHYSICS, ENGINEERING, AND ASSEMBLING TECHNOLOGIES OF DUAL-TRIBUTARY AND
LOAD-PATHED STRUCTURAL BODY-FRAMES:

"THE
NUMBER ONE STRUCTURAL PERFORMANCE GOAL OF CONTINUOUS REINFORCING IS TO
ACHIEVE MOMENTUM CONSERVATION AND EQUILIBRIUM IN ASSEMBLED RIGID
STRUCTURAL BODY-FRAMES" - RANDY LEE DUBE :
New Methods in building and structure frames Img008.28120425
THE PHYSICS OF STRUCTURAL
STRAP-NETS, CONTINUOUS STRUCTURAL REINFORCING, AND DUAL-FRAMES WITH
OPPOSITE AND INDEPENDENTLY ACTING 'A-B' FRAMES WASN'T DEVELOPED WHEN
THESE SYSTEMS WERE DEVELOPED, SO I HAD TO GO BACK AND RESEARCH THE
APPLICATIONS OF THE THIRD LAWS OF PHYSICS AND MODIFY (EXPAND) THEM TO
MEET THE PHYSICAL PERFORMABILITIES OF STRUCTURAL STRAP-NETTED ASSEMBLED
RIGID FRAMES:

  • MOMENTUM CONSERVATION AND EQUILIBRIUM
    FORMULA/EQUATION ABOVE
  • ORIGINALLY
    DEVELOPED BY PHYSICIST SIR ISAAC NEWTON
  • A STRUCTURAL STRAP-NETTED STRUCTURAL BODY-FRAME EXPANDS SOME
    OF NEWTON'S THIRD LAWS OF PHYSICS:    New Methods in building and structure frames 3RD_LAWS_OF_PHYSICS_EXPANSION014.11203735 .


  • STRUCTURAL
    STRAP-NETS ARE THE 'TENSION ROPES' (C) OF STEP 4 ABOVE, PLACED
    AND ATTACHED TO THE 'TENSION SPRING' (A, B) STRUCTURAL BODY-SHELL.
  • THE
    STRUCTURAL STRAP-NET REACTS TO FORCES AND MOVEMENTS ON AND FROM THE
    STRUCTURAL BODY-SHELL IN THREE CHRONOLOGICAL FUNCTIONS: 1) IMPACT MOMENT
    RESISTANCE, 2) FORCE ENERGY/SHOCK ABSORPTION, TRANSFER, DISSIPATION,
    AND DISTRIBUTION, 3) POST TENSIONING STRUCTURAL BODY-SHELL
    MOVEMENT/SEPARATION RESISTANCE.
  • THE
    STRAPPING CORDS BETWEEN THE STRAPPING NET CONNECTION ASSEMBLIES OF THE
    STRUCTURAL STRAP-NET ARE INSTALLED WITH MORE LENGTH THAN THE END
    CONNECTION DIMENSIONS, GIVING THE STRUCTURAL STRAP-NET ITS FLEXURE,
    ABSORPTION, DISSIPATION, AND ELASTICITY PROPERTIES.
  • IN
    WEAKER PSI STRENGTH STRUCTURAL BODY-SHELLS, THE STRUCTURAL STRAP-NET
    REINFORCES THE ENTIRE STRUCTURAL BODY-SHELL ASSEMBLAGE.
  • IN
    EQUAL/STRONGER PSI STRENGTH STRUCTURAL BODY-SHELLS, THE STRUCTURAL
    STRAP-NET REINFORCES THE STRUCTURAL BODY-SHELL CONNECTIONS AND
    CONNECTION ASSEMBLIES, WITH VARIOUS LEVELS OF REINFORCING TO THE TOTAL
    STRUCTURAL BODY-SHELL ASSEMBLAGES.


New Methods in building and structure frames Forms_Application010.234182325_std
STRUCTURAL
STRAP-NETTING NEUTRALIZES SOLID BEAMS AND ASSEMBLED WALL-PANELS BY
CONSERVING THE MOVEMENTS AND SEPARATIONS OF THE BEAMS, POSTS, AND
ASSEMBLAGES, EQUALIZING AND OPTIMIZING THE PROPERTY STRENGTHS OF THE
BEAMS, WALLS, AND ASSEMBLAGES.

  • THE
    BEAM/WALL END REINFORCING AND STRUCTURAL STRAP-NET CORNER
    'CLAW-CONNECTOR' CAPS PROVIDE THE MAJORITY OF THE MOMENT RESISTANCE FOR
    THE STRUCTURAL BODY-FRAME ASSEMBLAGE.
  • THE
    STRUSTURAL STRAP-NET RING AND LINKING CORDS PROVIDE FORCE/SHOCK
    ABSORBANCE, ADDITIONAL LOADS DISTRIBUTION, LOADS DISSIPATIONS, AND ALSO
    ACT AS THE POST-TENSIONING RESISTANCE CORDS.
  • REINFORCING
    AND POST-TENSIONING IS ACHIEVED EXTERNALLY TO THE BEAM/WALL ASSEMBLY,
    ALONG THE INTERIOR SIDES OF THE BEAMS, WALLS, AND STRUCTURE ASSEMBLAGES.
  • THE
    STRUCTURAL STRAP-NET FOLLOWS THE ENTIRE STRUCTURAL BODY-FRAME SHAPE,
    WHETHER THE SHAPE IS LINEAR (1-D), OPEN-PLANAR OR CLOSED-PLANAR (2-D),
    OR SPHERICAL-ENCLOSED (3-D).
  • THE
    STRUCTURAL STRAP-NETS CAN BE FITTED/CRAFTED TO EXTEND BEYOND THE MAIN
    STRAP-NETTED FRAME-BODY FOR EXTERNAL ANCHORAGING AND/OR RETAINING OF
    EXTERNAL ATTACHED STRUCTURAL COMPONENTS.
  • THE
    STRUCTURAL STRAP-NET IS MULTIPLE-ANCHORED AT SPECIFIED LOCATIONS ALONG
    THE UPPER AND LOWER STRUCTURAL BODY-FRAME WALL/BEAM TOPS & BOTTOMS.
  • THE
    STRUCTURAL STRAP-NET MAIN BODIES CAN BE MULTIPLIED AND INTERCONNECTED
    INTO EQUAL/SIMILAR SECTIONAL STRAP-NETS. (THIS IS FOR MULTIPLE-STORY
    BUILDINGS, COMPARTMENTAL STRUCTURE/VEHICLE BODIES, ETC.)
  • THE
    STRUCTURAL STRAP-NET LINEAR RING-CORDS FILL ALL GAPS IN LATERAL
    REINFORCING OF BUILDING INTERSECTION SEAMS, AND THE
    DIAGONAL/PERPERNDICULAR LINKING-CORDS ADDRESS AND MAINTAIN THE LINEAR
    VERTICAL CORNER SEAMS AND ASSEMBLAGES:    New Methods in building and structure frames Forms_Application011.236103816_std

STRUCTURAL STRAP-NETS REINFORCING INSTALLS
TO THE ENTIRE STRUCTURAL BODY-SHELL, ALONG THE INTERIOR SIDES OF THE
ENCLOSED SPACE:

  • THIS INSTALLATION
    METHOD APPLIES IN BOTH SITE-BUILT AND FACTORY-BUILT STRUCTURES!!
  • THE
    LEVEL PLATFORM FLOOR BASE INCREASES THE REINFORCING INSTALLATION AND
    FASTENING SAFETY FACTORS!!
  • THE
    REDUCED NUMBERS OF FRAME REINFORCING MATERIALS, PARTS, AND/OR FASTENERS
    ALSO INCREASE THE FRAMING, REINFORCING, AND FASTENING SAFETY FACTORS!!!
  • THIS
    REDUCED FRAME REINFORCING INSTALLATION METHOD CAN SPEED UP THE TOTAL
    FRAME ASSEMBLING PROCESS!
  • CROSS-BRACING
    STRUCTURAL WALLS CAN BE ELIMINATED IN SMALLER FLOOR SQUARE FOOTAGE
    STRUCTURES, AND REDUCED IN LARGER SQUARE FOOTAGE STRUCTURES.
  • IN
    MANUFACTURED BUILDINGS, VEHICLES AND CONTAINERS, THE STRUCTURAL
    STRAP-NET LINKING CORDS CAN CONTINUE TO INCLUDE TOP AND BOTTOM
    STRUCTURAL BODY-SHELL SIDES/PANELS.
  • THE
    STRUCTURAL STRAP-NETTED MAIN STRUCTURAL BODY-FRAME IS THE MAIN CORE
    COMPONENT OF THE DUAL-FRAME STRUCTURAL SYSTEM.
  • EXTENSIONS
    FROM THE STRUCTURAL STRAP-NET CAN EXTEND FROM ANY CORE DUAL-FRAME
    STRUCTURAL BODY-FRAME SIDE, WALL, OR PANEL, IN ANY DIRECTION TO THE
    INTERIOR OR EXTERIOR OF THE STRAP-NETTED STRUCTURAL BODY-SHELL!!
  • AS
    ILLUSTRATED ABOVE, THE STRUCTURAL STRAP-NET'S STRAP-CORDS CAN EXTEND
    INTO THE STRUCTURE'S FOUNDATION/CHASSIS FRAME FOR BETTER ANCHORAGING,
    AND ONTO ANY CROSS-FRAMING SYSTEM FOR BETTER AND MORE UNIFORM ATTACHING,
    CONNECTING, AND IMPACT/DURATIONAL FORCE RESISTING!!!
  • NOT
    ILLUSTRATED ABOVE ARE STRUCTURAL STRAP-NET EXTENSIONS FOR PARALLEL
    AND/OR DIAGONAL EXTERIOR (OPEN AND/OR CLOSED FRAMED) ATTACHED
    STRUCTURES, MECHANICAL EQUIPMENT, ADDITIONS, AND TEMPORARY
    ANCHORAGES!!!!
  • THE ABOVE ILLUSTRATED
    LISTED EXTERIOR BARRIER OPTIONS CAN BE APPLIED BY EITHER WRAP OR SPRAY
    APPLIED METHODS, FOR SAFER INSTALLATION, BETTER COVERAGE, AND LONGER
    LASTING RESULTS!!!
  • THE
    DECORATIVE COVERINGS LISTED ABOVE CAN ALSO PROVIDE EXPOSED WEATHER
    PROTECTION FOR BOTH THE BARRIER UNDERLAYMENTS AND THE STRUCTURE FRAME
    SHELL/ INTERIOR!!
  • STRUCTURAL STRAP-NETS
    CAN BE INSTALLED WITH WOOD, MASONRY, AND STEEL FRAME MATERIALS SAFELY,
    IN BOTH OPEN-SPACED AND SOLID-WALL/PANEL FRAME SYSTEMS!!
  • STRUCTURAL
    STRAP-NETS CONTINUOUS REINFORCING IS A CONSISTANT 'B'-FRAME OF THE
    STRUCTURAL DUAL-FRAME SYSTEM. THE 'A'-FRAMES CAN BE VARIABLE!!
  • WITH
    CONTINUOUS STRUCTURAL STRAP-NETS REINFORCING, NEW, LIGHTER-WEIGHT
    BUILDING MATERIALS CAN BE DEVELOPED AND USED AS THE 'A'-FRAME COMPONENT
    OF THE STRUCTURAL DUAL-FRAME SYSTEMS!

STRAP-NETTING BASICS:
New Methods in building and structure frames 1-LINE_DIAGRAMIC_BASIC_STRAP-NET.277111620_std

  • OUR
    BASIC STRUCTURAL STRAP-NETS WORK WELL WITH MANUFACTURED BUILDINGS AND
    SHEDS, SEMI-TRUCK/TRAIN TRAILERS AND CARGO HOLDS, HAZARDOUS MATERIALS
    STORAGE TANKS AND HOLDS, AND ADDITIONAL SIMILAR SHAPED AND UTILIZED
    STRUCTURES!!!
  • THE BASIC
    STRUCTURALSTRAP-NET CAN BE CONTINUOUSLY DUPLICATED FOR MULTI-STORY
    BUILDINGS AND STRUCTURES, AND/OR FOR COMPARTMENTALIZED STRUCTURES AND
    VEHICULAR BODY-FRAMES!!
  • THE
    WALL AND CORNER LINK-CORDS CAN BE EXTENDED BEYOND THE ANCHORING RING TO
    GRAB SECONDARY FRAME AND/OR ENTRENCHED-IN-SOILS FOUNDATION ANCHOR
    COMPONENTS!!
  • THE RETAINER RING CAN BE
    EXTENDED UP AND OVER CROSS-FRAMING MEMBERS TO GRAB UPPER FLOOR AND/OR
    ROOF FRAMING SYSTEMS!!
  • THE
    WALL AND CORNER LINK-CORDS CAN BE EXTENDED PERPENDICULARLY TO GRAB
    ATTACHED STRUCTURES AND/OR EQUIPMENT, CROSS-LINKING, AND/OR DECORATIVE
    FEATURING!!!
  • SEE PHOTO AND DRAWINGS
    ABOVE FOR MORE ACCURATE STRAP-NET AND REINFORCED STRUCTURE COMPONENT
    ILLUSTRATIONS.

SUMMARY:
WHETHER YOU ARE
LOOKING FOR:

  • BETTER COLLISION AND
    FORCE-RESISTANT BUILDINGS, STRUCTURES, CARS, FUEL AND STORAGE TANKS,
    BRIDGES, LEVEES, AND ADDITIONAL TYPES OF STRUCTURE FRAMES
  • INCREASING BUILDING
    AND VEHICLE ENERGY AND/OR FUEL EFFICIENCIES
  • ADDING
    INTERIOR BUILDING SPACE AND/OR DECORATIVE FEATURES UPGRADES
  • REDUCING
    GREENHOUSE GASSES AND OTHER POLLUTANTS
  • TEACHING/PRACTICING
    A NEW EXPANSION IN THE SCIENCE OF PHYSICS AND/OR DISCIPLINE OF
    ENGINEERING
  • REDUCING YOUR COSTS
    OF BUILDING CONSTRUCTION, ENERGIES, UPKEEP, AND INSURING
  • LOWERING
    YOUR PROPERTY AND PRODUCT DEVELOPMENT INVESTMENT RISKS AND RAISING YOUR
    INVESTMENT REWARDS
  • EXPANDING
    YOUR ARCHITECTURAL AND LAND PLANNING DESIGNING HORIZONS
  • DEVELOPING
    NEW TYPES OF CARS, PLANES, VIDEO ANIMATION AND SPECIAL EFFECTS,
    SPACECRAFT, AND BIOSPHERES
  • ADVANCING
    THE SCIENCE AND TECHNOLOGIES OF MEDICINE, ROBOTICS, PHYSICS, SPACE AND
    OCEAN EXPLORATION AND SETTLING;

THE
INNOVATIONS FROM STRUCTURAL STRAP-NETS AND EXTENSIONS CONTINUOUS
FLEXIBLE BUILDING AND STRUCTURE REINFORCING SYSTEMS CAN ASSIST YOUR
JOURNEY THERE (AND BEYOND?)!!!



GOD BLESS AND GOD'S SPEED;

RANDY LEE DUBE, TOR-EGGS-TOR DESIGN
SOLUTIONS
INNOVATOR OF
STRUCTURAL STRAP-NETS AND EXTENSIONS

"GO-GREEN, WITH HURRICANE-PROOF
BUILDING-FRAMES, BECAUSE WE NOW CAN"-RLD



New Methods in building and structure frames 899620
الرجوع الى أعلى الصفحة اذهب الى الأسفل
http://WwW.EngAswaN.C0M
 
New Methods in building and structure frames
الرجوع الى أعلى الصفحة 
صفحة 1 من اصل 1
 مواضيع مماثلة
-
» Advanced Analysis and Design of Steel Frames
» Exclusive : FastFrame 5.0.9 لتحليل الاطارات FRAMES المستوية XZ
» Exclusive : LIN PRO V 2.7.2 Program for static and dynamic analysis of plane frames
» Starting Methods and control
» Methods Of Soil Stabilization

صلاحيات هذا المنتدى:لاتستطيع الرد على المواضيع في هذا المنتدى
منتدى طلبة كلية الهندسه بأسوان :: الهندسة المدنية :: الـهـندســة الإنـشــائـيــة-
انتقل الى: